Safety_01.gif (3940 bytes)Pacific Employers                                         Advisors to Management

button_PEHomePage_02.gif (3155 bytes)
button_SafetyTopics_02.gif (3170 bytes)
 

Construction Safety

* Fall Protection *

Fall Protection – Construction

OSHA has a rule covering Fall Protection in the construction industry. Does this new standard cover you as a construction worker? You bet it does! The procedures specified in this standard are intended to prevent employees from falling off, onto, or through working levels, and to protect them from failing objects.

The standard stresses three types of protection to be used for fall protection. They are Guardrail Systems, Safety Net Systems, and Personal Fall Arrest Systems. It's up to your employer to determine which method is going to be used when an employee is on a walking or working surface, horizontal or vertical, with an unprotected side or edge which is 6 feet or more above a lower level. This includes floors, roofs, ramps, bridges. runways, etc., but not ladders, vehicles, or trailers, on which employees must be located in order to perform their job. Leading edges, residential construction and precast concrete erection may be exceptions to the rule. In these cases the employer must have a qualified person develop a written fall protection plan for the specific area in which this type of work is being performed. The plan must be maintained and kept up to date.

As a construction worker you also need to know that the subpart does Not apply when employees are making an inspection, investigation, or assessment of workplace conditions prior to the actual start of construction work, or after all construction has been completed.

In addition, Subpart M specifies that body belts will not be acceptable as part of a personal fall arrest system. (Note: the use of a body belt in a positioning device system will be acceptable.) The use of a nonlocking snaphook as a part of personal fall arrest systems and positioning device systems will be prohibited. What this means to you is that non-locking snaphooks and body belts will become a thing of the past in the construction industry. Workers will be using full body harnesses with locking snaphooks for fall arrest systems. Many of you are already using this equipment.

* SAFETY REMINDER *

The Fall Protection Standard Requires Employers to Train Employees,
Retrain Them When Equipment or Site Changes Occur,
and Certify and Date the Training.

We welcome comments about this article, and your requests for future topics.

    If you have a specific topic you would like to see covered here or that you may need for your company, please send an Email to our Tail Gate Safety Topics editor, Dave Miller at demiller@pacificemployers.com or to peinfo@pacificemployers.com. Thanks!

 

DangerBar.gif (1613 bytes)

Copyright © 2002 by David E. Miller

DangerBar.gif (1613 bytes)